BRAND NEW filters, not surplus. (Mask not included).
20 YEAR SHELF-LIFE!!!
Combining cutting-edge ultra-low particulate air (ULPA)
filtration with 40 mm standard NATO threading, these P3 certified biofilters
work with your existing NBC/CBRN gas mask to provide unparalleled, long-lasting
protection from airborne viral and bacterial threats. These filters are vastly
superior to common half-face masks in practically every scenario.
Please Note: This bundle comes with 6 filters in total.
40 mm x 1/7” NATO filter standard (EN 148-1:1999) threading
P3-certified protection (according to EN 143:2000 standards)
filters out 99.9999+% of biothreats (not suitable for other CBRN threats)
Lightweight (100g) construction
Utilizes some of the highest quality ULPA filter construction
that works on particles as small as 0.2 microns
Prevents aerosol and airborne transmission of viral and
20-year shelf life for easy long-term storage
Hydrophobic filter paper is ideal for decontamination showers
Maximum Protection from Pandemic
& Biological Threats
Modern gas masks provide unparalleled protection from a wide
variety of chemical, biological, radiological and nuclear threats. And now,
with the new MIRA Safety ParticleMax P3 Filter, the same high-quality mask can
protect you from bacterial and viral threats—including widespread pandemics
like Ebola, coronavirus (including COVID-19) and H1N1.
This effectively turns your ultra-secure CBRN gas mask into a
full-face respirator with the highest level of protection from airborne
threats. Unlike common surgical masks and half-face respirators, you’ll get a
perfect seal and full-face protection for everything including the soft tissue
around your eyes.
Engineered using the latest in ULPA filtration technology, the
same kind you’ll find in “clean rooms” where semiconductors are manufactured.
These P3 filters meet some of the highest standards in practically every
They’re made using special filtration media and grade 16 filter
paper, resulting in a MERV rating of 20 (the highest attainable for air
filtration quality). ULPA filters at this level are handcrafted using specially
made fiberglass material, then pushed through a rigorous quality control process
to ensure consistent quality across each and every filter.
They’ve also been subjected to extreme testing to ensure they’ll
filter out any and almost all environmental biothreats. The filter is even
hydrophobic, so you can wear your mask in a decontamination shower without
compromising your safety.
The end result?
A filter and gas mask combo that’s practically impenetrable for
almost all of the world’s biothreats.
To infect you, viruses must enter your system through
particulate or aerosol intrusion. Once you’ve got a perfect seal around your
full face (possibly even reinforced with a full-body HAZ-SUIT), it is
practically impossible for these threats to enter your body.
NOTE: Due to their sophisticated and specialized construction,
these filters will NOT provide protection from common CBRN threats and are
primarily intended for protection from biological threats and airborne
illnesses. We recommend keeping a variety of filters on hand to tackle whatever
threat comes along.
This product comes in a pack of six (6) sealed filters with a
shelf life of 20 years. They’re designed for easy long-term storage and
handling, with a single package of six filters providing a solid amount of
protection for one user (though we recommend stocking a full 2-week supply, if
Certification & Details:
• P3 R according to EN
• TH3 P R SL according to
• TM3 P R SL according to
• 110 x 55 mm size
• Suitable for use with
powered air purifying respirators (PAPR)
• Compatible with
half-masks and full-face respirators
• Compatible with STANAG
4155, EN148-1, GOST threading
• P3 filtration removes
99.9999+% of airborne biothreats as small as 0.2 microns
• Hydrophobic internal
construction suitable for chemical showers
• Incinerable for safe
disposal after use
• Less than .05%
penetration at up to 95 l/min. airflow
• Proven in aerosol
concentrations of up to 20 ± 5 mg/m3
Our P3 filters can be stored the same way you’d store other gas
mask filters: in a cool, dry place away from exposure to hazardous substances.
The filters should be stored in their original packaging at temperatures from
−58 to 122°F (−50 to +50°С) protected from the effects of precipitation and
groundwater. Maximum humidity during storage of the filters is 98%. Storage in
places other than those specified can affect shelf life. Shelf life expiration
is specified on each filter. The shelf life of each filter is 20 years.